Conversion of standardized ReadMe file for
file /./ftp/cats/J/A_A/453/1003 into FORTRAN code for loading all data files into arrays.
Note that special values are assigned to unknown or unspecified
numbers (also called NULL numbers);
when necessary, the coordinate components making up the right ascension
and declination are converted into floating-point numbers
representing these angles in degrees.
program load_ReadMe
C=============================================================================
C F77-compliant program generated by readme2f_1.81 (2015-09-23), on 2026-Oct-11
C=============================================================================
* This code was generated from the ReadMe file documenting a catalogue
* according to the "Standard for Documentation of Astronomical Catalogues"
* currently in use by the Astronomical Data Centers (CDS, ADC, A&A)
* (see full documentation at URL http://vizier.u-strasbg.fr/doc/catstd.htx)
* Please report problems or questions to
C=============================================================================
implicit none
* Unspecified or NULL values, generally corresponding to blank columns,
* are assigned one of the following special values:
* rNULL__ for unknown or NULL floating-point values
* iNULL__ for unknown or NULL integer values
real*4 rNULL__
integer*4 iNULL__
parameter (rNULL__=--2147483648.) ! NULL real number
parameter (iNULL__=(-2147483647-1)) ! NULL int number
integer idig ! testing NULL number
C=============================================================================
Cat. J/A+A/453/1003 SCUBA ultracompact HII regions (Thompson+, 2006)
*================================================================================
*A SCUBA imaging survey of ultracompact HII regions.
*The environments of massive star formation.
* Thompson M.A., Hatchell J., Walsh A.J., Macdonald G.H., Millar T.J.
* <Astron. Astrophys., 453, 1003-1026 (2006)>
* =2006A&A...453.1003T
C=============================================================================
C Internal variables
integer*4 i__
c - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
C Declarations for 'table1.dat' ! UC HII fields observed during the survey, their central
coordinates and estimated distance to the UC HIIs in
each field
integer*4 nr__
parameter (nr__=105) ! Number of records
character*54 ar__ ! Full-size record
C J2000 position composed of: RAh RAm RAs DE- DEd DEm DEs
real*8 RAdeg (nr__) ! (deg) Right Ascension J2000
real*8 DEdeg (nr__) ! (deg) Declination J2000
C ---------------------------------- ! (position vector(s) in degrees)
character*13 Field (nr__) ! UC HII field designation
character*1 n_Field (nr__) ! [+] Note on Field (1)
character*1 f_Field (nr__) ! [*] Note on Field (2)
integer*4 RAh (nr__) ! (h) Right ascension (J2000)
integer*4 RAm (nr__) ! (min) Right ascension (J2000)
real*4 RAs (nr__) ! (s) Right ascension (J2000)
character*1 DE_ (nr__) ! Declination sign (J2000)
integer*4 DEd (nr__) ! (deg) Declination (J2000)
integer*4 DEm (nr__) ! (arcmin) Declination (J2000)
real*4 DEs (nr__) ! (arcsec) Declination (J2000)
real*4 Dist (nr__) ! (kpc) ?=- Distance or near distance (3)
real*4 Dist2 (nr__) ! (kpc) ? Far distance (3)
character*5 r_Dist (nr__) ! Distance reference
*Note (1): Fields indicated with a dagger (+) show no evidence for UC HII
* regions in the Wood & Churchwell (1989ApJS...69..831W) and
* Hofner et al. (1994ApJ...429L..85H) surveys,
* or in the literature search described in Sect. 2.1
*Note (2): Fields indicated by an asterisk (*) were subject to the 450{mu}m
* calibration problems described in Sect. 2.3.
*Note (3): In cases where there is an ambiguity between the near and far
* kinematic distance both values are listed.
c - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
C Declarations for 'refs.dat' ! References
integer*4 nr__1
parameter (nr__1=19) ! Number of records
character*144 ar__1 ! Full-size record
integer*4 Ref (nr__1) ! Reference number
character*19 BibCode (nr__1) ! BibCode
character*20 Aut (nr__1) ! Author's name
character*98 Com (nr__1) ! Comments
c - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
C Declarations for 'table2.dat' ! Identifications, coordinates, peak and integrated fluxes
of each submillimetre source detected in the survey
integer*4 nr__2
parameter (nr__2=159) ! Number of records
character*105 ar__2 ! Full-size record
C J2000 position composed of: RAh RAm RAs DE- DEd DEm DEs
real*8 RAdeg_1 (nr__2) ! (deg) Right Ascension J2000
real*8 DEdeg_1 (nr__2) ! (deg) Declination J2000
C ---------------------------------- ! (position vector(s) in degrees)
character*13 Field_1 (nr__2) ! UCH II field designation
character*1 m_Field (nr__2) ! [a-d] Multiplicity index on Field
character*18 Source (nr__2) ! Source designation (1)
character*1 n_Source (nr__2) ! [a-e] Note on Source (2)
integer*4 RAh_1 (nr__2) ! (h) Right ascension (J2000)
integer*4 RAm_1 (nr__2) ! (min) Right ascension (J2000)
real*4 RAs_1 (nr__2) ! (s) Right ascension (J2000)
character*1 DE__1 (nr__2) ! Declination sign (J2000)
integer*4 DEd_1 (nr__2) ! (deg) Declination (J2000)
integer*4 DEm_1 (nr__2) ! (arcmin) Declination (J2000)
integer*4 DEs_1 (nr__2) ! (arcsec) Declination (J2000)
character*1 l_Fp450um (nr__2) ! Limit flag on Fp450um (3)
real*4 Fp450um (nr__2) ! (Jy) ?=- Peak flux density at 450um (in Jy/beam) (6)
real*4 e_Fp450um (nr__2) ! (Jy) ? rms uncertainty in Fp450um (in Jy/beam) (4)
character*1 n_Fp450um (nr__2) ! [+] Note on Fp450um (5)
real*4 Fp850um (nr__2) ! (Jy) ?=- Peak flux density at 850um (in Jy/beam) (6)
real*4 e_Fp850um (nr__2) ! (Jy) ? rms uncertainty in Fp850um (in Jy/beam) (4)
character*1 l_Fi450um (nr__2) ! Limit flag on F450umI (3)
real*4 Fi450um (nr__2) ! (Jy) ?=- Integrated flux density at 450um
* (in Jy/beam) (6)
real*4 e_Fi450um (nr__2) ! (Jy) ? rms uncertainty in F450umI (in Jy/beam) (4)
character*1 n_Fi450um (nr__2) ! [+] Note on Fi450um (5)
real*4 Fi850um (nr__2) ! (Jy) ?=- Integrated flux density at 850um
* (in Jy/beam) (6)
real*4 e_Fi850um (nr__2) ! (Jy) ? rms uncertainty in F850umI (in Jy/beam) (4)
*Note (1): All source positions were measured from the 850{mu}m images unless
* otherwise stated.
*Note (2): Notes as follows:
* a = A noisy bolometer clipped from the final rebinned image is
* located close to this source and thus the measured flux is a
* lower limit to the true flux.
* b = These sources are separable in the unsmoothed 450{mu}m image but
* blended in the 850{mu}m image. The quoted 850{mu}m flux is
* that of the blended single source. The coordinates quoted are
* measured from the 450{mu}m image.
* c = These sources are separable in the 850{mu}m images but blended
* into one source in the smoothed 450{mu}m images. The quoted
* 450{mu}m flux is the flux of the blended single source.
* d = A noisy bolometer clipped from the final rebinned 850{mu}m image
* lies over this source and it was not possible to masure any
* sensible peak or integrated 850{mu}m flux.
* e = This sources lies on the edge of the field of view and thus one
* or more of the quoted fluxes is a lower limit to the true flux.
*Note (3): Upper limits for non-detections at 450um
*Note (4): Quoted errors include calibration uncertainties of 30% at 450{mu}m
* and 10% at 850{mu}m.
*Note (5): 450{mu}m peak flux measurements indicated by a dagger (+) are
* measured from smoothed images and the flux density unit in this
* case is Janskys per 14" beam.
* The resolution of the unsmoothed images is 8" at 450 {mu}m
* and 14" at 850 {mu}m.
*Note (6): Where it was not possible to measure a 450{mu}m flux, either due
* to the smaller FOV of the short wavelength array or calibration
* problems this is indicated by an ellipsis (---).
C=============================================================================
C Loading file 'table1.dat' ! UC HII fields observed during the survey, their central
* coordinates and estimated distance to the UC HIIs in
* each field
C Format for file interpretation
1 format(
+ A13,A1,A1,1X,I2,1X,I2,1X,F4.1,1X,A1,I2,1X,I2,1X,F4.1,1X,F4.1,
+ 1X,F4.1,1X,A5)
C Effective file loading
open(unit=1,status='old',file=
+'table1.dat')
write(6,*) '....Loading file: table1.dat'
do i__=1,105
read(1,'(A54)')ar__
read(ar__,1)
+ Field(i__),n_Field(i__),f_Field(i__),RAh(i__),RAm(i__),
+ RAs(i__),DE_(i__),DEd(i__),DEm(i__),DEs(i__),Dist(i__),
+ Dist2(i__),r_Dist(i__)
if (idig(ar__(40:43)).EQ.0) Dist(i__) = rNULL__
if(ar__(45:48) .EQ. '') Dist2(i__) = rNULL__
RAdeg(i__) = rNULL__
DEdeg(i__) = rNULL__
c Derive coordinates RAdeg and DEdeg from input data
c (RAdeg and DEdeg are set to rNULL__ when unknown)
if(RAh(i__) .GT. -180) RAdeg(i__)=RAh(i__)*15.
if(RAm(i__) .GT. -180) RAdeg(i__)=RAdeg(i__)+RAm(i__)/4.
if(RAs(i__) .GT. -180) RAdeg(i__)=RAdeg(i__)+RAs(i__)/240.
if(DEd(i__) .GE. 0) DEdeg(i__)=DEd(i__)
if(DEm(i__) .GE. 0) DEdeg(i__)=DEdeg(i__)+DEm(i__)/60.
if(DEs(i__) .GE. 0) DEdeg(i__)=DEdeg(i__)+DEs(i__)/3600.
if(DE_(i__).EQ.'-'.AND.DEdeg(i__).GE.0) DEdeg(i__)=-DEdeg(i__)
c ..............Just test output...........
write(6,1)
+ Field(i__),n_Field(i__),f_Field(i__),RAh(i__),RAm(i__),
+ RAs(i__),DE_(i__),DEd(i__),DEm(i__),DEs(i__),Dist(i__),
+ Dist2(i__),r_Dist(i__)
write(6,'(6H Pos: 2F8.4)') RAdeg(i__),DEdeg(i__)
c .......End.of.Just test output...........
end do
close(1)
C=============================================================================
C Loading file 'refs.dat' ! References
C Format for file interpretation
2 format(I2,1X,A19,1X,A20,3X,A98)
C Effective file loading
open(unit=1,status='old',file=
+'refs.dat')
write(6,*) '....Loading file: refs.dat'
do i__=1,19
read(1,'(A144)')ar__1
read(ar__1,2)Ref(i__),BibCode(i__),Aut(i__),Com(i__)
c ..............Just test output...........
write(6,2)Ref(i__),BibCode(i__),Aut(i__),Com(i__)
c .......End.of.Just test output...........
end do
close(1)
C=============================================================================
C Loading file 'table2.dat' ! Identifications, coordinates, peak and integrated fluxes
* of each submillimetre source detected in the survey
C Format for file interpretation
3 format(
+ A13,1X,A1,1X,A18,1X,A1,1X,I2,1X,I2,1X,F4.1,1X,A1,I2,1X,I2,1X,
+ I2,1X,A1,F5.1,1X,F4.1,A1,1X,F4.1,1X,F3.1,1X,A1,F6.1,1X,F5.1,
+ A1,1X,F5.1,1X,F4.1)
C Effective file loading
open(unit=1,status='old',file=
+'table2.dat')
write(6,*) '....Loading file: table2.dat'
do i__=1,159
read(1,'(A105)')ar__2
read(ar__2,3)
+ Field_1(i__),m_Field(i__),Source(i__),n_Source(i__),
+ RAh_1(i__),RAm_1(i__),RAs_1(i__),DE__1(i__),DEd_1(i__),
+ DEm_1(i__),DEs_1(i__),l_Fp450um(i__),Fp450um(i__),
+ e_Fp450um(i__),n_Fp450um(i__),Fp850um(i__),e_Fp850um(i__),
+ l_Fi450um(i__),Fi450um(i__),e_Fi450um(i__),n_Fi450um(i__),
+ Fi850um(i__),e_Fi850um(i__)
if (idig(ar__2(60:64)).EQ.0) Fp450um(i__) = rNULL__
if(ar__2(66:69) .EQ. '') e_Fp450um(i__) = rNULL__
if (idig(ar__2(72:75)).EQ.0) Fp850um(i__) = rNULL__
if(ar__2(77:79) .EQ. '') e_Fp850um(i__) = rNULL__
if (idig(ar__2(82:87)).EQ.0) Fi450um(i__) = rNULL__
if(ar__2(89:93) .EQ. '') e_Fi450um(i__) = rNULL__
if (idig(ar__2(96:100)).EQ.0) Fi850um(i__) = rNULL__
if(ar__2(102:105) .EQ. '') e_Fi850um(i__) = rNULL__
RAdeg_1(i__) = rNULL__
DEdeg_1(i__) = rNULL__
c Derive coordinates RAdeg_1 and DEdeg_1 from input data
c (RAdeg_1 and DEdeg_1 are set to rNULL__ when unknown)
if(RAh_1(i__) .GT. -180) RAdeg_1(i__)=RAh_1(i__)*15.
if(RAm_1(i__) .GT. -180) RAdeg_1(i__)=RAdeg_1(i__)+RAm_1(i__)/4.
if(RAs_1(i__) .GT. -180) RAdeg_1(i__)=RAdeg_1(i__)+RAs_1(i__)/240.
if(DEd_1(i__) .GE. 0) DEdeg_1(i__)=DEd_1(i__)
if(DEm_1(i__) .GE. 0) DEdeg_1(i__)=DEdeg_1(i__)+DEm_1(i__)/60.
if(DEs_1(i__) .GE. 0) DEdeg_1(i__)=DEdeg_1(i__)+DEs_1(i__)/3600.
if(DE__1(i__).EQ.'-'.AND.DEdeg_1(i__).GE.0) DEdeg_1(i__)=-DEdeg_1(i__)
c ..............Just test output...........
write(6,3)
+ Field_1(i__),m_Field(i__),Source(i__),n_Source(i__),
+ RAh_1(i__),RAm_1(i__),RAs_1(i__),DE__1(i__),DEd_1(i__),
+ DEm_1(i__),DEs_1(i__),l_Fp450um(i__),Fp450um(i__),
+ e_Fp450um(i__),n_Fp450um(i__),Fp850um(i__),e_Fp850um(i__),
+ l_Fi450um(i__),Fi450um(i__),e_Fi450um(i__),n_Fi450um(i__),
+ Fi850um(i__),e_Fi850um(i__)
write(6,'(6H Pos: 2F8.4)') RAdeg_1(i__),DEdeg_1(i__)
c .......End.of.Just test output...........
end do
close(1)
C=============================================================================
stop
end
C Locate position of first digit in string; or return 0
integer function idig(c)
character*(*) c
character*1 c1
integer lc,i
lc=len(c)
idig=0
do i=1,lc
if(c(i:i).ne.' ') go to 1
end do
1 if(i.gt.lc) return
c1=c(i:i)
if(c1.eq.'.'.or.c1.eq.'-'.or.c1.eq.'+') i=i+1
if(i.gt.lc) return
c1=c(i:i)
if(c1.ge.'0'.and.c1.le.'9') idig=i
return
end