Conversion of standardized ReadMe file for
file /./ftp/cats/J/A_A/587/A130 into FORTRAN code for reading data files line by line.
Note that special values are assigned to unknown or unspecified
numbers (also called NULL numbers);
when necessary, the coordinate components making up the right ascension
and declination are converted into floating-point numbers
representing these angles in degrees.
program load_ReadMe
C=============================================================================
C F77-compliant program generated by readme2f_1.81 (2015-09-23), on 2026-Oct-14
C=============================================================================
* This code was generated from the ReadMe file documenting a catalogue
* according to the "Standard for Documentation of Astronomical Catalogues"
* currently in use by the Astronomical Data Centers (CDS, ADC, A&A)
* (see full documentation at URL http://vizier.u-strasbg.fr/doc/catstd.htx)
* Please report problems or questions to
C=============================================================================
implicit none
* Unspecified or NULL values, generally corresponding to blank columns,
* are assigned one of the following special values:
* rNULL__ for unknown or NULL floating-point values
* iNULL__ for unknown or NULL integer values
real*4 rNULL__
integer*4 iNULL__
parameter (rNULL__=--2147483648.) ! NULL real number
parameter (iNULL__=(-2147483647-1)) ! NULL int number
integer idig ! testing NULL number
C=============================================================================
Cat. J/A+A/587/A130 HCO and CH_3_O in prestellar cores (Bacmann+, 2016)
*===============================================================================
*The origin of gas-phase HCO and CH_3_O radicals in prestellar cores.
* Bacmann A., Faure A.
* <Astron. Astrophys. 587, A130 (2016)>
* =2016A&A...587A.130B (SIMBAD/NED BibCode)
C=============================================================================
C Internal variables
integer*4 i__
c - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
C Declarations for 'table1.dat' ! Observed sources and their properties
integer*4 nr__
parameter (nr__=8) ! Number of records
character*52 ar__ ! Full-size record
C J2000 position composed of: RAh RAm RAs DE- DEd DEm DEs
real*8 RAdeg ! (deg) Right Ascension J2000
real*8 DEdeg ! (deg) Declination J2000
C ---------------------------------- ! (position vector(s) in degrees)
character*7 Source ! Source name
integer*4 RAh ! (h) Right ascension (J2000)
integer*4 RAm ! (min) Right ascension (J2000)
real*4 RAs ! (s) Right ascension (J2000)
character*1 DE_ ! Declination sign (J2000)
integer*4 DEd ! (deg) Declination (J2000)
integer*4 DEm ! (arcmin) Declination (J2000)
real*4 DEs ! (arcsec) Declination (J2000)
real*4 nc_H2 ! (cm-2) H_2_ column density
character*9 Region ! Region
character*4 r_nc_H2 ! References for nc(H2) (1)
*Note (1): References as follows:
* 1 = Roy et al. (2014A&A...562A.138R)
* 2 = Brady Ford & Shirley (2011ApJ...728..144F)
* 3 = Tafalla et al. (2004A&A...416..191T)
* 4 = Tafalla & Santiago (2004A&A...414L..53T)
* 5 = Bacmann et al. (2002A&A...389L...6B)
c - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
C Declarations for 'table3.dat' ! Line parameters for HCO transitions
integer*4 nr__1
parameter (nr__1=32) ! Number of records
character*81 ar__1 ! Full-size record
character*7 Source_1 ! Source name
real*8 Freq ! (MHz) Frequency of the transition
real*4 rms ! (mK) rms noise in spectrum
integer*4 Tmb ! (mK) ?=- Line peak intensity, T_mb_
real*4 dv ! (km/s) ?=- Linewidth
character*1 l_Int ! Limit flag on intensity
real*4 Int ! (K.km/s) Integrated intensity
real*4 e_Int ! (K.km/s) ?=- Error on integrated intensity
character*27 FileName ! Name of corresponding spectrum file in
* subdirectory sp (1)
*Note (1): in a few cases, two or three transitions are on the same spectrum.
c - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
C Declarations for 'table4.dat' ! Line parameters for CH_3_O transitions
integer*4 nr__2
parameter (nr__2=96) ! Number of records
character*81 ar__2 ! Full-size record
character*7 Source_2 ! Source name
real*8 Freq_1 ! (MHz) Frequency of the transition
real*4 rms_1 ! (mK) rms noise in spectrum
integer*4 Tmb_1 ! (mK) ?=- Line peak intensity, T_mb_
real*4 dv_1 ! (km/s) ?=- Linewidth
character*1 l_Int_1 ! Limit flag on intensity
real*4 Int_1 ! (K.km/s) Integrated intensity
real*4 e_Int_1 ! (K.km/s) ?=- Error on integrated intensity
character*25 FileName_1 ! Name of corresponding spectrum file in
* subdirectory sp (1)
*Note (1): in a few cases, two transitions are on the same spectrum.
c - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
C Declarations for 'table5.dat' ! Line parameters for CH_3_OH transitions
integer*4 nr__3
parameter (nr__3=148) ! Number of records
character*81 ar__3 ! Full-size record
character*7 Source_3 ! Source name
real*8 Freq_2 ! (MHz) Frequency of the transition
real*4 rms_2 ! (mK) rms noise in spectrum
integer*4 Tmb_2 ! (mK) ?=- Line peak intensity, T_mb_
real*4 dv_2 ! (km/s) ?=- Linewidth
character*1 l_Int_2 ! Limit flag on intensity
real*4 Int_2 ! (K.km/s) Integrated intensity
real*4 e_Int_2 ! (K.km/s) ?=- Error on integrated intensity
character*27 FileName_2 ! Name of corresponding spectrum file in
* subdirectory sp (1)
*Note (1): in a few cases, two or three transitions are on the same spectrum.
c - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
C Declarations for 'sp/*' ! Spectra for all sources and all transitions
integer*4 nr__4
parameter (nr__4=252) ! Number of records
character*29 ar__4 ! Full-size record
real*8 Freq_3 ! (MHz) Frequency
real*4 Int_3 ! (K) Intensity in Ta* unit
C=============================================================================
C Loading file 'table1.dat' ! Observed sources and their properties
C Format for file interpretation
1 format(
+ A7,2X,I2,1X,I2,1X,F5.2,1X,A1,I2,1X,I2,1X,F4.1,1X,E4.1,1X,A9,
+ 1X,A4)
C Effective file loading
open(unit=1,status='old',file=
+'table1.dat')
write(6,*) '....Loading file: table1.dat'
do i__=1,8
read(1,'(A52)')ar__
read(ar__,1)
+ Source,RAh,RAm,RAs,DE_,DEd,DEm,DEs,nc_H2,Region,r_nc_H2
RAdeg = rNULL__
DEdeg = rNULL__
c Derive coordinates RAdeg and DEdeg from input data
c (RAdeg and DEdeg are set to rNULL__ when unknown)
if(RAh .GT. -180) RAdeg=RAh*15.
if(RAm .GT. -180) RAdeg=RAdeg+RAm/4.
if(RAs .GT. -180) RAdeg=RAdeg+RAs/240.
if(DEd .GE. 0) DEdeg=DEd
if(DEm .GE. 0) DEdeg=DEdeg+DEm/60.
if(DEs .GE. 0) DEdeg=DEdeg+DEs/3600.
if(DE_.EQ.'-'.AND.DEdeg.GE.0) DEdeg=-DEdeg
c ..............Just test output...........
write(6,1)
+ Source,RAh,RAm,RAs,DE_,DEd,DEm,DEs,nc_H2,Region,r_nc_H2
write(6,'(6H Pos: 2F8.4)') RAdeg,DEdeg
c .......End.of.Just test output...........
end do
close(1)
C=============================================================================
C Loading file 'table3.dat' ! Line parameters for HCO transitions
C Format for file interpretation
2 format(
+ A7,3X,F9.2,1X,F5.1,1X,I4,2X,F4.2,2X,A1,F5.3,4X,F5.3,1X,A27)
C Effective file loading
open(unit=1,status='old',file=
+'table3.dat')
write(6,*) '....Loading file: table3.dat'
do i__=1,32
read(1,'(A81)')ar__1
read(ar__1,2)Source_1,Freq,rms,Tmb,dv,l_Int,Int,e_Int,FileName
if (Tmb .EQ. 45) Tmb = iNULL__
if (idig(ar__1(33:36)).EQ.0) dv = rNULL__
if (idig(ar__1(49:53)).EQ.0) e_Int = rNULL__
c ..............Just test output...........
write(6,2)Source_1,Freq,rms,Tmb,dv,l_Int,Int,e_Int,FileName
c .......End.of.Just test output...........
end do
close(1)
C=============================================================================
C Loading file 'table4.dat' ! Line parameters for CH_3_O transitions
C Format for file interpretation
3 format(
+ A7,3X,F9.2,1X,F5.1,1X,I4,2X,F4.2,2X,A1,E7.1,2X,E7.1,1X,A25)
C Effective file loading
open(unit=1,status='old',file=
+'table4.dat')
write(6,*) '....Loading file: table4.dat'
do i__=1,96
read(1,'(A81)')ar__2
read(ar__2,3)
+ Source_2,Freq_1,rms_1,Tmb_1,dv_1,l_Int_1,Int_1,e_Int_1,
+ FileName_1
if (Tmb_1 .EQ. 45) Tmb_1 = iNULL__
if (idig(ar__2(33:36)).EQ.0) dv_1 = rNULL__
if (idig(ar__2(49:55)).EQ.0) e_Int_1 = rNULL__
c ..............Just test output...........
write(6,3)
+ Source_2,Freq_1,rms_1,Tmb_1,dv_1,l_Int_1,Int_1,e_Int_1,
+ FileName_1
c .......End.of.Just test output...........
end do
close(1)
C=============================================================================
C Loading file 'table5.dat' ! Line parameters for CH_3_OH transitions
C Format for file interpretation
4 format(
+ A7,3X,F9.2,1X,F5.1,1X,I4,2X,F4.2,2X,A1,F5.3,4X,F5.3,1X,A27)
C Effective file loading
open(unit=1,status='old',file=
+'table5.dat')
write(6,*) '....Loading file: table5.dat'
do i__=1,148
read(1,'(A81)')ar__3
read(ar__3,4)
+ Source_3,Freq_2,rms_2,Tmb_2,dv_2,l_Int_2,Int_2,e_Int_2,
+ FileName_2
if (Tmb_2 .EQ. 45) Tmb_2 = iNULL__
if (idig(ar__3(33:36)).EQ.0) dv_2 = rNULL__
if (idig(ar__3(49:53)).EQ.0) e_Int_2 = rNULL__
c ..............Just test output...........
write(6,4)
+ Source_3,Freq_2,rms_2,Tmb_2,dv_2,l_Int_2,Int_2,e_Int_2,
+ FileName_2
c .......End.of.Just test output...........
end do
close(1)
C=============================================================================
C Loading file 'sp/*' ! Spectra for all sources and all transitions
C Format for file interpretation
5 format(F13.4,1X,E15.4)
C Effective file loading
open(unit=1,status='old',file=
+'sp/*')
write(6,*) '....Loading file: sp/*'
do i__=1,252
read(1,'(A29)')ar__4
read(ar__4,5)Freq_3,Int_3
c ..............Just test output...........
write(6,5)Freq_3,Int_3
c .......End.of.Just test output...........
end do
close(1)
C=============================================================================
stop
end
C Locate position of first digit in string; or return 0
integer function idig(c)
character*(*) c
character*1 c1
integer lc,i
lc=len(c)
idig=0
do i=1,lc
if(c(i:i).ne.' ') go to 1
end do
1 if(i.gt.lc) return
c1=c(i:i)
if(c1.eq.'.'.or.c1.eq.'-'.or.c1.eq.'+') i=i+1
if(i.gt.lc) return
c1=c(i:i)
if(c1.ge.'0'.and.c1.le.'9') idig=i
return
end