Conversion of standardized ReadMe file for
file /./ftp/cats/J/MNRAS/407/2109 into FORTRAN code for reading data files line by line.
Note that special values are assigned to unknown or unspecified
numbers (also called NULL numbers);
when necessary, the coordinate components making up the right ascension
and declination are converted into floating-point numbers
representing these angles in degrees.
program load_ReadMe
C=============================================================================
C F77-compliant program generated by readme2f_1.81 (2015-09-23), on 2026-Oct-08
C=============================================================================
* This code was generated from the ReadMe file documenting a catalogue
* according to the "Standard for Documentation of Astronomical Catalogues"
* currently in use by the Astronomical Data Centers (CDS, ADC, A&A)
* (see full documentation at URL http://vizier.u-strasbg.fr/doc/catstd.htx)
* Please report problems or questions to
C=============================================================================
implicit none
* Unspecified or NULL values, generally corresponding to blank columns,
* are assigned one of the following special values:
* rNULL__ for unknown or NULL floating-point values
* iNULL__ for unknown or NULL integer values
real*4 rNULL__
integer*4 iNULL__
parameter (rNULL__=--2147483648.) ! NULL real number
parameter (iNULL__=(-2147483647-1)) ! NULL int number
integer idig ! testing NULL number
C=============================================================================
Cat. J/MNRAS/407/2109 Kinematic study of open clusters (Vande Putte+, 2010)
*================================================================================
*A kinematic study of open clusters: implications for their origin.
* Vande Putte D.V., Garnier T.P., Ferreras I., Mignani R.P., Cropper M.
* <Mon. Not. R. Astron. Soc., 407, 2109-2121 (2010)>
* =2010MNRAS.407.2109V
C=============================================================================
C Internal variables
integer*4 i__
c - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
C Declarations for 'table1.dat' ! Observed data relevant to orbit calculations
integer*4 nr__
parameter (nr__=481) ! Number of records
character*96 ar__ ! Full-size record
C J2000 position composed of: RAh RAm RAs DE- DEd DEm DEs
real*8 RAdeg ! (deg) Right Ascension J2000
real*8 DEdeg ! (deg) Declination J2000
C ---------------------------------- ! (position vector(s) in degrees)
integer*4 Seq ! Sequential number
character*17 Name ! Cluster name
integer*4 RAh ! (h) Right ascension (J2000)
integer*4 RAm ! (min) Right ascension (J2000)
integer*4 RAs ! (s) Right ascension (J2000)
character*1 DE_ ! Declination sign (J2000)
integer*4 DEd ! (deg) Declination (J2000)
integer*4 DEm ! (arcmin) Declination (J2000)
integer*4 DEs ! (arcsec) Declination (J2000)
integer*4 Dist ! (pc) Distance
real*8 e_Dist ! (pc) rms uncertainty on Dist
real*8 RV ! (km/s) Radial velocity
real*4 e_RV ! (km/s) ?=- rms uncertainty on RV
real*4 pmRA ! (mas/yr) Proper motion along RA, pmRA*cosDE
real*4 e_pmRA ! (mas/yr) ?=- rms uncertainty on pmRA
real*4 pmDE ! (mas/yr) Proper motion along DE
real*4 e_pmDE ! (mas/yr) ?=- rms uncertainty on pmDE
c - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
C Declarations for 'table2.dat' ! Present positions and velocities of open
clusters, as calculated for use in the orbit code
integer*4 nr__1
parameter (nr__1=481) ! Number of records
character*90 ar__1 ! Full-size record
integer*4 Seq_1 ! Sequential number
real*4 x ! (kpc) Galactocentric x position (1)
real*4 e_x ! (kpc) rms uncertainty on x
real*4 y ! (kpc) Galactocentric y position (1)
real*4 e_y ! (kpc) rms uncertainty on y
real*4 z ! (kpc) Galactocentric z position (1)
real*4 e_z ! (kpc) rms uncertainty on z
real*8 dx_dt ! (km/s) Velocity along x axis (1)
real*4 e_dx_dt ! (km/s) rms uncertainty on dx/dt
real*8 dy_dt ! (km/s) Velocity along y axis (1)
real*4 e_dy_dt ! (km/s) rms uncertainty on dy/dt
real*8 dz_dt ! (km/s) Velocity along z axis (1)
real*4 e_dz_dt ! (km/s) rms uncertainty on dz/dt
*Note (1): the galactocentric right-handed coordinate system is defined such
* that the Sun position is (0,8kpc,0); the velocities in this system are
* related to (U,V,W) velcoties with: dx/dt=V+220km/s, dy/dt=-U, dz/dt=W
c - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
C Declarations for 'table4.dat' ! Main orbital parameters for clusters
integer*4 nr__2
parameter (nr__2=481) ! Number of records
character*53 ar__2 ! Full-size record
integer*4 Seq_2 ! Sequential number
real*4 zmax ! (kpc) Maximum height above the plane
real*4 e_zmax ! (kpc) rms uncertainty on zmax
real*4 eta ! Radial quantity (Rmax-Rmin)/(Rmax+Rmin)/2 (2)
real*4 e_eta ! rms uncertainty on eta
real*4 v_Fe_H_ ! ([Sun]) ?=- Metallicity
real*4 e__Fe_H_ ! ([Sun]) ?=- rms uncertainty on [Fe/H]
real*4 Age ! (Gyr) ?=- Age
real*4 e_Age ! (Gyr) ?=- rms uncertainty on Age
integer*4 N_ ! ?=- Number of cluster stars used to determine
* the proper motion
*Note (2): Rmin and Rmax are the distance between the cluster and the
* Galactic centre, projected onto the disk; this quantity is twice
* the eccentricity for an elliptical orbit, and is small if the cluster
* velocity is aligned with the local circular velocity.
C=============================================================================
C Loading file 'table1.dat' ! Observed data relevant to orbit calculations
C Format for file interpretation
1 format(
+ I4,1X,A17,1X,I2,1X,I2,1X,I2,1X,A1,I2,1X,I2,1X,I2,1X,I5,1X,
+ F7.1,1X,F8.2,2X,F5.2,2X,F6.2,1X,F4.2,1X,F6.2,1X,F4.2)
C Effective file loading
open(unit=1,status='old',file=
+'table1.dat')
write(6,*) '....Loading file: table1.dat'
do i__=1,481
read(1,'(A96)')ar__
read(ar__,1)
+ Seq,Name,RAh,RAm,RAs,DE_,DEd,DEm,DEs,Dist,e_Dist,RV,e_RV,pmRA,
+ e_pmRA,pmDE,e_pmDE
if (idig(ar__(67:71)).EQ.0) e_RV = rNULL__
if (idig(ar__(81:84)).EQ.0) e_pmRA = rNULL__
if (idig(ar__(93:96)).EQ.0) e_pmDE = rNULL__
RAdeg = rNULL__
DEdeg = rNULL__
c Derive coordinates RAdeg and DEdeg from input data
c (RAdeg and DEdeg are set to rNULL__ when unknown)
if(RAh .GT. -180) RAdeg=RAh*15.
if(RAm .GT. -180) RAdeg=RAdeg+RAm/4.
if(RAs .GT. -180) RAdeg=RAdeg+RAs/240.
if(DEd .GE. 0) DEdeg=DEd
if(DEm .GE. 0) DEdeg=DEdeg+DEm/60.
if(DEs .GE. 0) DEdeg=DEdeg+DEs/3600.
if(DE_.EQ.'-'.AND.DEdeg.GE.0) DEdeg=-DEdeg
c ..............Just test output...........
write(6,1)
+ Seq,Name,RAh,RAm,RAs,DE_,DEd,DEm,DEs,Dist,e_Dist,RV,e_RV,pmRA,
+ e_pmRA,pmDE,e_pmDE
write(6,'(6H Pos: 2F8.4)') RAdeg,DEdeg
c .......End.of.Just test output...........
end do
close(1)
C=============================================================================
C Loading file 'table2.dat' ! Present positions and velocities of open
* clusters, as calculated for use in the orbit code
C Format for file interpretation
2 format(
+ I4,1X,F6.3,1X,F5.3,1X,F6.3,1X,F5.3,1X,F6.3,1X,F5.3,1X,F7.3,1X,
+ F6.3,1X,F8.3,1X,F6.3,1X,F8.3,1X,F6.3)
C Effective file loading
open(unit=1,status='old',file=
+'table2.dat')
write(6,*) '....Loading file: table2.dat'
do i__=1,481
read(1,'(A90)')ar__1
read(ar__1,2)
+ Seq_1,x,e_x,y,e_y,z,e_z,dx_dt,e_dx_dt,dy_dt,e_dy_dt,dz_dt,
+ e_dz_dt
c ..............Just test output...........
write(6,2)
+ Seq_1,x,e_x,y,e_y,z,e_z,dx_dt,e_dx_dt,dy_dt,e_dy_dt,dz_dt,
+ e_dz_dt
c .......End.of.Just test output...........
end do
close(1)
C=============================================================================
C Loading file 'table4.dat' ! Main orbital parameters for clusters
C Format for file interpretation
3 format(
+ I4,1X,F5.2,1X,F5.2,1X,F4.2,1X,F4.2,1X,F5.2,1X,F4.2,1X,F5.3,1X,
+ F5.3,1X,I3)
C Effective file loading
open(unit=1,status='old',file=
+'table4.dat')
write(6,*) '....Loading file: table4.dat'
do i__=1,481
read(1,'(A53)')ar__2
read(ar__2,3)
+ Seq_2,zmax,e_zmax,eta,e_eta,v_Fe_H_,e__Fe_H_,Age,e_Age,N_
if (idig(ar__2(28:32)).EQ.0) v_Fe_H_ = rNULL__
if (idig(ar__2(34:37)).EQ.0) e__Fe_H_ = rNULL__
if (idig(ar__2(39:43)).EQ.0) Age = rNULL__
if (idig(ar__2(45:49)).EQ.0) e_Age = rNULL__
if (N_ .EQ. 45) N_ = iNULL__
c ..............Just test output...........
write(6,3)
+ Seq_2,zmax,e_zmax,eta,e_eta,v_Fe_H_,e__Fe_H_,Age,e_Age,N_
c .......End.of.Just test output...........
end do
close(1)
C=============================================================================
stop
end
C Locate position of first digit in string; or return 0
integer function idig(c)
character*(*) c
character*1 c1
integer lc,i
lc=len(c)
idig=0
do i=1,lc
if(c(i:i).ne.' ') go to 1
end do
1 if(i.gt.lc) return
c1=c(i:i)
if(c1.eq.'.'.or.c1.eq.'-'.or.c1.eq.'+') i=i+1
if(i.gt.lc) return
c1=c(i:i)
if(c1.ge.'0'.and.c1.le.'9') idig=i
return
end