Conversion of standardized ReadMe file for
file /./ftp/cats/J/MNRAS/461/136 into FORTRAN code for reading data files line by line.
Note that special values are assigned to unknown or unspecified
numbers (also called NULL numbers);
when necessary, the coordinate components making up the right ascension
and declination are converted into floating-point numbers
representing these angles in degrees.
program load_ReadMe
C=============================================================================
C F77-compliant program generated by readme2f_1.81 (2015-09-23), on 2026-Oct-14
C=============================================================================
* This code was generated from the ReadMe file documenting a catalogue
* according to the "Standard for Documentation of Astronomical Catalogues"
* currently in use by the Astronomical Data Centers (CDS, ADC, A&A)
* (see full documentation at URL http://vizier.u-strasbg.fr/doc/catstd.htx)
* Please report problems or questions to
C=============================================================================
implicit none
* Unspecified or NULL values, generally corresponding to blank columns,
* are assigned one of the following special values:
* rNULL__ for unknown or NULL floating-point values
* iNULL__ for unknown or NULL integer values
real*4 rNULL__
integer*4 iNULL__
parameter (rNULL__=--2147483648.) ! NULL real number
parameter (iNULL__=(-2147483647-1)) ! NULL int number
integer idig ! testing NULL number
C=============================================================================
Cat. J/MNRAS/461/136 MMB Survey ex-OH catalogue (Avison+, 2016)
*================================================================================
*Excited-state hydroxyl maser catalogue from the methanol multibeam survey.
*I. Positions and variability.
* Avison A., Quinn L.J., Fuller G.A., Caswell J.L., Green J.A., Breen S.L.,
* Ellingsen S.P., Gray M.D., Pestalozzi M., Thompson M.A., Voronkov M.A.
* <Mon. Not. R. Astron. Soc., 461, 136-155 (2016)>
* =2016MNRAS.461..136A (SIMBAD/NED BibCode)
C=============================================================================
C Internal variables
integer*4 i__
c - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
C Declarations for 'table1.dat' ! MMB Survey ex-OH catalogue
integer*4 nr__
parameter (nr__=159) ! Number of records
character*127 ar__ ! Full-size record
C J2000 position composed of: RAh RAm RAs DE- DEd DEm DEs
real*8 RAdeg ! (deg) Right Ascension J2000
real*8 DEdeg ! (deg) Declination J2000
C ---------------------------------- ! (position vector(s) in degrees)
character*14 MMBOH ! Name (LLL.lll+BB.bbbA)
* for MMBOH-LLL.lll+BB.bbbA (1)
integer*4 RAh ! (h) Right ascension (J2000) (2)
integer*4 RAm ! (min) Right ascension (J2000)
real*4 RAs ! (s) Right ascension (J2000)
character*1 DE_ ! Declination sign (J2000) (2)
integer*4 DEd ! (deg) Declination (J2000)
integer*4 DEm ! (arcmin) Declination (J2000)
real*4 DEs ! (arcsec) Declination (J2000)
integer*4 Trans ! (MHz) [6030 6035] Transition (3)
character*21 r_Pos ! Position reference (4)
real*4 Speak ! (Jy) ?=- MX/(ATCA) or LHPC(Stokes (I))
* peak flux density in Trans frequency
real*8 Vpeak ! (km/s) ?=- MX/(ATCA) or LHPC(Stokes (I))
* peak velocity in Trans frequency
character*1 n_Speak ! [i] i for Speak and Vpeak of
* LHPC(Stokes (I)) (5)
real*4 b_Vpeak ! (km/s) ?=- Lower value of Vpeak velocity range (6)
real*4 B_Vpeak_1 ! (km/s) ?=- Upper value of Vpeak velocity range (6)
character*1 n_Vpeak ! [*] Note on Vpeak (7)
real*4 Speak2 ! (Jy) ?=- MX RHCP peak flux density in
* Trans frequency
real*8 Vpeak2 ! (km/s) ?=- MX RHCP peak velocity in Trans frequency
real*4 b_Vpeak2 ! (km/s) ?=- Lower value of Vpeak2 velocity range (6)
real*4 B_Vpeak2_1 ! (km/s) ?=- Upper value of Vpeak2 velocity range (6)
*Note (1): Source name, which is defined as the source position in Galactic
* coordinates (rounded at the third decimal point).
*Note (2): Source position in right ascension and declination (sources with
* positions from MMB observations have three decimal places in RA and two in Dec,
* all previously detected masers have two and one decimal accuracy,
* respectively).
*Note (3): the ex-OH transition for the listed maser, counterpart 6030-MHz masers
* are listed directly below their 6035-MHz partner.
*Note (4): Reference for the position listed, with the following abbreviations:
* ATCA 09 = our ATCA observation results from 2009
* ATCA 13 = our ATCA observation results from 2013 October
* ATCA 14 = our ATCA observation results from 2014 February
* CV95 = Caswell & Vaile (1995MNRAS.273..328C)
* C97 = Caswell (1997MNRAS.289..203C)
* C98 = Caswell (1998MNRAS.297..215C)
* C03 = Caswell (2003MNRAS.341..551C)
* C01 = Caswell (2001MNRAS.326..805C)
* PIGGY = MMB "piggyback" data
*Note (5): i for values for Stokes I (total intensity) flux density taken from
* the respective ATCA observation as these sources are not present in the nearest
* Parkes MX. As such only columns 7-9 are filled in.
*Note (6): the ex-OH maser minimum-maximum velocity range over which emission is
* seen in the spectrum.
*Note (7): Sources 333.136-0.432 and 333.135-0.431 have a blended spectrum
* preventing a complete velocity range to be estimated from the MX data.
C=============================================================================
C Loading file 'table1.dat' ! MMB Survey ex-OH catalogue
C Format for file interpretation
1 format(
+ A14,1X,I2,1X,I2,1X,F6.3,1X,A1,I2,1X,I2,1X,F6.3,1X,I4,1X,A21,
+ F6.2,1X,F7.2,A1,F6.1,2X,F6.1,A1,F6.2,1X,F7.2,1X,F6.1,2X,F6.1)
C Effective file loading
open(unit=1,status='old',file=
+'table1.dat')
write(6,*) '....Loading file: table1.dat'
do i__=1,159
read(1,'(A127)')ar__
read(ar__,1)
+ MMBOH,RAh,RAm,RAs,DE_,DEd,DEm,DEs,Trans,r_Pos,Speak,Vpeak,
+ n_Speak,b_Vpeak,B_Vpeak_1,n_Vpeak,Speak2,Vpeak2,b_Vpeak2,
+ B_Vpeak2_1
if (idig(ar__(69:74)).EQ.0) Speak = rNULL__
if (idig(ar__(76:82)).EQ.0) Vpeak = rNULL__
if (idig(ar__(84:89)).EQ.0) b_Vpeak = rNULL__
if (idig(ar__(92:97)).EQ.0) B_Vpeak_1 = rNULL__
if (idig(ar__(99:104)).EQ.0) Speak2 = rNULL__
if (idig(ar__(106:112)).EQ.0) Vpeak2 = rNULL__
if (idig(ar__(114:119)).EQ.0) b_Vpeak2 = rNULL__
if (idig(ar__(122:127)).EQ.0) B_Vpeak2_1 = rNULL__
RAdeg = rNULL__
DEdeg = rNULL__
c Derive coordinates RAdeg and DEdeg from input data
c (RAdeg and DEdeg are set to rNULL__ when unknown)
if(RAh .GT. -180) RAdeg=RAh*15.
if(RAm .GT. -180) RAdeg=RAdeg+RAm/4.
if(RAs .GT. -180) RAdeg=RAdeg+RAs/240.
if(DEd .GE. 0) DEdeg=DEd
if(DEm .GE. 0) DEdeg=DEdeg+DEm/60.
if(DEs .GE. 0) DEdeg=DEdeg+DEs/3600.
if(DE_.EQ.'-'.AND.DEdeg.GE.0) DEdeg=-DEdeg
c ..............Just test output...........
write(6,1)
+ MMBOH,RAh,RAm,RAs,DE_,DEd,DEm,DEs,Trans,r_Pos,Speak,Vpeak,
+ n_Speak,b_Vpeak,B_Vpeak_1,n_Vpeak,Speak2,Vpeak2,b_Vpeak2,
+ B_Vpeak2_1
write(6,'(6H Pos: 2F8.4)') RAdeg,DEdeg
c .......End.of.Just test output...........
end do
close(1)
C=============================================================================
stop
end
C Locate position of first digit in string; or return 0
integer function idig(c)
character*(*) c
character*1 c1
integer lc,i
lc=len(c)
idig=0
do i=1,lc
if(c(i:i).ne.' ') go to 1
end do
1 if(i.gt.lc) return
c1=c(i:i)
if(c1.eq.'.'.or.c1.eq.'-'.or.c1.eq.'+') i=i+1
if(i.gt.lc) return
c1=c(i:i)
if(c1.ge.'0'.and.c1.le.'9') idig=i
return
end